The background of a photo is where a chart hides most of its work. A sofa, a wall or a lawn behind a pet can cover a large share of the chart in shadows, textures and several shades of one color, and nobody looks at it once the piece is framed. Leave it unstitched and the fabric becomes the background: those stitches, and often several skeins, simply disappear.

It works well on some photos and not at all on others, and the difference is mostly in the photo, not the settings.

<Callout type="tip" title="Quick answer">
Use a photo where a **plain, even backdrop surrounds the subject and touches the photo's edges**. In our generator, switch on **Remove the background**: it takes color out **from the edges inwards** and leaves those squares as **bare fabric**. Adjust **"How much counts as background"** (4 to 40): **lower** if it bites into the subject, **higher** if it leaves a halo. Check the **outline** in the preview. To measure the saving, compare **total stitches with the option off and on**: as arithmetic, a **120 × 150** chart is **18,000 stitches** fully stitched; if the total drops to **11,000**, you've saved **7,000**, which is **28 hours at 250 stitches an hour**. **Busy backgrounds** need a different photo or a tighter crop, not a higher setting.
</Callout>

## Which photos it works on

| Backdrop | Result | What to do |
|---|---|---|
| Painted wall, evenly lit | Usually clean | Start at the default setting |
| Sheet, blanket or studio backdrop | Usually clean | Smooth out folds before the photo |
| Clear sky behind a building or a person | Often clean along the top | Check the other edges: grass or street may not go |
| Wall with a strong shadow across it | Stops at the shadow, or runs into dark areas of the subject | Relight, or accept a stitched shadow |
| Wall at the top, floor at the bottom | One of the two may stay | Crop the photo so one backdrop surrounds the subject |
| Garden, bookshelf, busy room | Removes almost nothing, or too much | Choose another photo, or crop tight |
| Subject the same color as the backdrop | Removes part of the subject | Choose a photo with contrast |

## Why the photo matters more than the setting

Our generator's background option isn't subject recognition. It doesn't know what a dog or a face is. It starts from every pixel around the edge of the photo, treats those as background, and spreads inwards into any neighboring pixel whose color is close enough to the average of what it has already taken. Whatever it reaches becomes bare fabric; everything else is stitched.

That's why the settings hint says it works best on plain backgrounds, a wall, a studio backdrop or a sheet, and warns that on a garden or a busy room it will take too much or nothing at all. Three practical consequences follow:

- **The backdrop has to reach the edges.** The fill starts at the photo's border. A plain wall behind the subject that is framed by a doorway or furniture at the edges never gets reached.
- **One even backdrop beats two.** The fill compares against an average of everything it has taken. A photo edged with a white wall on top and a brown floor below gives an average that matches neither well.
- **It works on the whole uploaded photo.** Cropping in the generator decides which part becomes the chart, but the removal still starts from the edges of the photo you uploaded. If the edges are cluttered and the plain area is only in the middle, crop in your phone's editor first and upload that copy. [Crop a photo for cross stitch](/blog/crop-photo-for-cross-stitch) covers the crop itself.

If your subject runs off the edge of the photo, a portrait cut at the chest for example, the edge pixels of the subject are counted as background too. Usually that's a thin line, but if the chest is close in color to the backdrop the fill can spread into it. Check that edge in the preview.

## Before you upload: make the backdrop easy

For a new photo, set it up:

- **A plain wall or a sheet behind the subject**, filling the frame on every side.
- **Even light** on the backdrop. Hard shadows create a second, darker "background" the fill may stop at.
- **Contrast** between subject and backdrop: a dark dog on a pale blanket, a pale cat on a darker one.
- **A little space** between the subject and the edges, so the backdrop surrounds it.

For a photo you already have, a small edit can help. Making the background a little lighter or darker than the subject, as [edit a photo for cross stitch](/blog/edit-photo-for-cross-stitch) describes, turns the edge into a clearer change in tone. If you use an editor that can cut out a subject and place it on a flat, plain color, that flat color around every edge is the easiest possible case for the fill.

[Choosing a photo for a pet portrait](/blog/cross-stitch-pet-portrait-tips) suggests taking one backup shot against a plain wall or blanket for exactly this reason.

## Step by step in the generator

1. **Upload the photo** and crop to the subject with a little space around it.
2. **Set the chart width, fabric count and colors** you plan to use. Note the **total stitches** shown under the preview; with the background option off, it's the width times the height.
3. **Switch on "Remove the background".** The preview now shows the removed squares as bare fabric, and a line below it says what percentage of the photo was taken out.
4. **Adjust "How much counts as background"**, which runs from 4 to 40. Low keeps only colors nearly identical to the edges; high reaches further in, and eventually into the subject. If the readout says it took almost all of the photo, turn it down. If it says it took almost none, turn it up, or accept that the backdrop is too busy for this method.
5. **Check the outline** (next section). Move the setting a step at a time, because the change between neighboring values can be sudden.
6. **Note the new total stitches.** The difference from step 2 is your saving.

The percentage readout is for the whole uploaded photo, not your cropped chart, so use the change in total stitches to measure the saving, not the percentage.

## Check the edge, not just the background

The background usually looks right quickly. The edge takes longer. Zoom in on the preview and look for:

- **A halo**: a ring of background-colored stitches hugging the subject. Turn the setting up a step, or accept a thin halo; it often reads as a soft outline from a distance.
- **Bites**: gaps where part of the subject went with the background, typically pale fur against a pale wall, dark hair against a dark wall, or an ear tip. Turn the setting down.
- **Islands**: small patches of backdrop left stitched inside gaps, between an arm and a body or under a chin. The fill only reaches areas connected to the edge, so enclosed gaps stay. You can leave those stitches out by hand when you stitch; mark them on your printout first.
- **Whiskers and stray hairs**: thinner than a stitch, so they tend to go either way. [Backstitch](/blog/backstitch-cross-stitch) them afterwards if they matter.

Stitches along the edge are decided by how much of each square is subject: a square that's more than half background becomes bare fabric, and a square that's mostly subject is stitched. A slight softening of the edge in the mask stops the outline looking cut out with scissors.

<ToolCTA title="See how many stitches the background costs" text="Upload a photo with a plain backdrop, note the total stitches, then switch on background removal and compare. The preview is free; the $5.99 PDF has symbol and color charts, DMC numbers and skein counts, and re-exporting that photo with different settings is free." />

## Measuring what you save

The saving is exactly the number of squares that went bare, and the generator's total tells you that number directly. Here's the arithmetic from there, with example paces rather than claims about how fast anyone stitches:

| Chart | Fully stitched | Total with background removed (example) | Stitches saved | Hours saved at 250/hr | Hours saved at 400/hr |
|---|---|---|---|---|---|
| 100 × 100 | 10,000 | 6,500 | 3,500 | 14 | ~9 |
| 120 × 150 | 18,000 | 11,000 | 7,000 | 28 | ~18 |
| 150 × 150 | 22,500 | 13,500 | 9,000 | 36 | ~23 |
| 200 × 200 | 40,000 | 22,000 | 18,000 | 72 | 45 |

Use your own pace: [how long does cross stitch take](/blog/how-long-does-cross-stitch-take) explains timing a 10 × 10 block. [Cross stitch stitch count](/blog/cross-stitch-stitch-count) goes into counting stitches on charts that don't show a total.

Background stitches can also be slower than they look. A photographed wall is rarely one color, and scattered single stitches where two close shades meet each mean a thread change.

### Skeins and colors

Two things change in the thread list when the background goes:

- **Colors used only in the background disappear**, and every color in a key costs at least one skein however few stitches it has. The total skein figure above the thread list shows the effect.
- **The color budget moves to the subject.** The generator picks its colors from the squares that will be stitched. With the background gone, the same number of colors is spent entirely on the subject, which can mean more shades in fur or skin. If you'd rather save skeins, lower the color count and check the subject still looks right.

## Stitching an unstitched background

A bare background changes a few habits:

- **Don't carry thread across it.** DMC advises [avoiding long stretches of thread at the back](https://www.dmc.com/US/en/technique-cross-stitch-begin) because they can distort the fabric, tangle and show through, and says to finish and restart when moving to a distant area of the same color. Behind bare fabric, a carried thread is visible.
- **Choose the fabric color deliberately.** The fabric is now part of the picture. Our preview shows empty squares on a light cream ground whatever fabric you'll use, so it tells you which squares are bare, not how the portrait will look on gray or navy. DMC lists its [Aida in 19 color options](https://www.dmc.com/US/en/products/aida-embroidery-fabric), and Zweigart's [Stern-Aida 3706](https://shop.zweigart.de/produkt/3706-stern-aida/) is listed in 30 colors on Zweigart's shop. [Colored Aida for cross stitch](/blog/colored-aida-cross-stitch) covers picking a color and testing show-through.
- **Check coverage at the edge.** Where stitches meet bare fabric, gaps between strands are more noticeable. The Cross Stitch Guild suggests [checking your stitches in daylight](https://www.thecrossstitchguild.com/cross-stitch-basics/thread-basics-for-cross-stitching.aspx) and adjusting the number of strands if needed.
- **Keep it clean.** A bare background shows marks that a stitched one would hide. Wash your hands before each session and store the work covered.

## When removal isn't the answer

- **The background tells the story.** A dog on its favorite chair, a couple in front of the church. Keep it, and spend fewer colors on it instead: [how to turn a photo into a cross stitch pattern](/blog/how-to-turn-a-photo-into-a-cross-stitch-pattern) covers keeping a background calm.
- **The backdrop is busy.** No setting separates a tabby cat from a patterned rug. Crop tighter, choose another photo, or keep a simplified stitched background.
- **The subject blends into the backdrop.** A white dog on white bedding loses its outline either way. A photo with contrast is the fix.

When you have a photo with a plain backdrop, [open it in the generator](/#start), note the total stitches, and switch the option on.

## Frequently asked questions

### Why remove the background from a cross stitch photo?

Because nobody looks at it, and it can be a large share of the stitching. Every background square left bare is a stitch you don't make, and colors used only in the background drop out of the key, with their skeins. The subject also stands out more against plain fabric than against a stitched sofa or wall.

### What kind of photo works for background removal?

One where the subject is surrounded by a plain, even backdrop that touches the edges of the photo: a wall, a sheet, a studio backdrop, a clear sky. Our generator removes color from the edges inwards, so a garden, a bookshelf or a busy room either stops almost at once or runs into the subject.

### How do I know how many stitches removing the background saves?

Compare the total stitches under the preview with the background option off and on, at the same size and settings. With it off, the total is width times height. The difference is the stitches saved. Divide that by your own stitches per hour, from a timed 10 by 10 block, to get the hours saved.

### Why did background removal eat part of my pet?

The tolerance is too high for that photo, or the subject is close in color to the backdrop. Turn the tolerance down until the outline is intact. If the coat and wall are genuinely similar, like a cream dog against a cream wall, no setting separates them cleanly; use a photo with more contrast instead.

### What fabric should I use with an unstitched background?

One that contrasts with the subject's edge, because the fabric becomes the background. Our preview shows empty squares on a light cream ground whatever fabric you choose, so judge the fabric with a swatch in daylight. DMC lists its Aida in 19 color options, and Zweigart's shop lists 30 colors of its 14-count Stern-Aida.

## Sources

- [DMC — How to begin cross stitch (avoid long stretches of thread at the back; they can show through the fabric)](https://www.dmc.com/US/en/technique-cross-stitch-begin)
- [DMC — Aida fabric (19 color options)](https://www.dmc.com/US/en/products/aida-embroidery-fabric)
- [Zweigart — 3706 Stern-Aida (14 count, 30 colors listed)](https://shop.zweigart.de/produkt/3706-stern-aida/)
- [The Cross Stitch Guild — Thread basics (check stitches in daylight; adjust strands for some colors)](https://www.thecrossstitchguild.com/cross-stitch-basics/thread-basics-for-cross-stitching.aspx)